| Project |
Required value |
Inspection instruments and methods |
Actual value |
| Exterior |
Translucent paste, no impurities. |
Visual inspection |
Translucent paste, no impurities. |
| savings period |
3 Months |
Store sealed at room temperature 25℃ |
3 Months |
| Hardness / Shore A |
28±7 |
Shore/hardness tester |
22 |
| Full cure time/h |
(12~72h) |
Apply the paste to the substrate and solidify naturally |
12h |
| Drying time/min |
(10～40min) |
Apply the paste to the substrate and let it dry naturally |
35min |
| High and low temperature resistance |
(-60-180℃) |
Oven timing |
(-60-180℃) |
| Tear strength: KN/M |
≥3.0 |
New economical tensile press |
3.6 |
| Tensile strength/MPa |
≥1.0 |
New economical tensile press |
1.12 |
HAZARD IDENTIFICATION
Danger Category: non-flammable goods
Danger Message: Avoid contact with skin and eyes. Use and store only in cool, ventilated place
Route of Exposure: skin contact and accidental ingestion
Health Hazard:
Eyes: Direct contact may cause moderate irritation
Skin: may cause moderate irritation
Inhalation: anesthetic effect on the central nervous system
Ingestion: inhalation of high concentration of this product in a short period of time may cause obvious irritation of
eyes and upper respiratory tract, congestion of conjunctiva and pharynx, dizziness, headache, nausea, vomiting,
chest tightness, weakness of limbs, unsteady gait, blurred consciousness. Severe cases may have restlessness,
convulsions, coma
Chronic Poisoning: long-term contact can produce neurasthenia syndrome, hepatomegaly, abnormal
menstruation of female workers. Dry skin, chap, dermatitis
